ABB IRB 6640 Foundry Prime Product Manual page 321

5
6
7
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
Action
On the side where the retaining ring, bore
is fitted, the rear shaft unit shall be
pressed against the retaining ring, bore.
On the side where the retaining ring, bore
is not fitted, refit the rear shaft unit com-
pletely into the frame.
The rear shaft unit to the right shows a
correct fitting.
© Copyright 2011-2018 ABB. All rights reserved.
4.5.4.2 Replacing balancing device (design 2)
Note
xx0900000084
• A: Rear shaft unit
• B: Retaining ring, bore
xx0900000085
xx0900000083
Continues on next page
4 Repair
Continued
321