ABB IRB 6640 Foundry Prime Product Manual page 324

4 Repair
4.5.4.2 Replacing balancing device (design 2)
Continued
19
20
21
22
Continues on next page
324
Action
Apply rust preventive (Mercasol) on the
front shaft.
Refit the front shaft using the dismantle
and mounting tool.
Note
• Apply rust preventive (Mercasol)
on the shaft.
Refit the hex socket head cap screw
M16x70 quality 8.8 steel.
Use Loctite 2701.
Restore the balancing device in one of the
methods.
© Copyright 2011-2018 ABB. All rights reserved.
Note
For art. no. see:
• Additional equipment - Foundry
Prime on page 314
xx1000000559
• A: Mercasol
For art. no. see:
• Required equipment - tools etc. on
page 313
Described in section Dismounting and
mounting tool 3HAC028920-001 on
xx0900000080
• A: Protection plug
• B: Hex socket head cap screw
M16x70
• C: Washer
• D: Shaft
• E: Press tool or Distance tool
Tightening torque: 200 Nm.
Method 1: Described in section
the balancing device using a hydraulic press
tool on page 336
Method 2: Described in section
the balancing device using distance tool on
page 331.
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
page469.
Restoring
Restoring