ABB IRB 6640 Foundry Prime Product Manual page 325

23
24
25
26
27
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
Action
Apply Loctite 577 in the attachment holes
of the cover.
If the balancing device is reused, check
that the gasket on the cover is not dam-
aged.
Fit the old cover with the air nipple
Apply rust preventive (Mercasol) around
the edge of the cover as a protection of
the broken paint layers.
Fill the cradle bearings with 70 ml, Optimol
PDO.
Note
The inner hole is used for lubrication.
The outer hole is used for air outlet.
© Copyright 2011-2018 ABB. All rights reserved.
4.5.4.2 Replacing balancing device (design 2)
Note
For art. no. see:
• Additional equipment - Foundry
Prime on page 314
xx1000000631
• A: Loctite 577 in holes (4 pcs)
For art. no. see:
• Additional equipment - Foundry
Prime on page 314
xx1000000632
• A: Mercasol
xx0900000090
Continues on next page
4 Repair
Continued
325