ABB IRB 6640 Foundry Prime Product Manual page 415

4
5
Refitting gearbox axis 2 to the frame
Use this procedure to refit gearbox axis 2.
1
2
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
Action
Clean the joint surface outside the o-ring.
Apply flange sealing (Loctite 574) on the
joint surface outside the o-ring as shown in
the figure.
Action
CAUTION
The gearbox weighs 98 kg! All lifting equip-
ment used must be sized accordingly!
Fit the lifting tool, in the uppermost hole of
the gearbox axis 2 and secure it with a
roundsling in an overhead crane or similair.
© Copyright 2011-2018 ABB. All rights reserved.
4.7.2 Replacing gearbox axis 2
Note
xx1000000383
Parts:
• A: Flange sealing (Loctite 574)
• B: Joint surface
See figure above.
Note
For art. no. see:
• Required equipment on page 406
xx1000000378
Part:
• A: Lifting tool
Continues on next page
4 Repair
Continued
415