ABB IRB 6640 Foundry Prime Product Manual page 400

4 Repair
4.7.1 Replacing gearbox axis 1
Continued
8
9
Continues on next page
400
Action
Tighten the screws with the correct tighten-
ing torque.
Tip
Use a torque wrench with a holder for bits
as recommended in Replacing gearbox axis
1 on page 387.
The space is cramped.
Apply Mercasol on the attachment screws
and washers.
Note
Mercasol shall be applied after the attach-
ment screws has been tightened!
© Copyright 2011-2018 ABB. All rights reserved.
Note
Tightening torque: 105 Nm.
xx1000000362
• A: Attachment screw
• B: Holder for bits
xx1000000363
• A: Attachment screw
• B: Mercasol
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N