ABB IRB 6640 Foundry Prime Product Manual page 414

4 Repair
4.7.2 Replacing gearbox axis 2
Continued
2
3
Continues on next page
414
Action
Make sure that the o-ring (339.3x5.7) is fit-
ted correctly on the new gear box unit.
Apply a layer of Mercasol, with a thickness
of minimum 0.5 mm, on the unpainted sur-
face of the gearbox, as shown in the figure.
Make sure the surface is covered properly,
it should not be possible to see through the
layer of Mercasol.
© Copyright 2011-2018 ABB. All rights reserved.
Note
For art. no. see:
• Required equipment on page 406
xx0600003128
xx1000000380
Parts:
• A: Mercasol (on unpainted surface)
• B: Gearbox axis 2
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N