ABB IRB 6640 Foundry Prime Product Manual page 271

8
9
Refitting support shaft
1
2
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
4.4.3 Replacement of support shaft with bearing axis 5
Action
Remove the six attachment screws.
Install two screws in the threaded holes to pull
the support shaft with bearing out.
Action
Apply rust protection Mercasol on the edge on
the new support shaft with bearing.
Apply Loctite on surface A and Mercasol on sur-
face B.
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
Continued
Note
xx1500001687
xx1500001688
Note
xx1500001693
xx1500001692
A Loctite 574
B Mercasol
Continues on next page
271