ABB IRB 6640 Foundry Prime Product Manual page 313

N
O
P
Q
Required parts
Equipment
Balancing device
Maintenance parts, shaft
Maintenance parts, cradle
Front shaft
VK cover
Required equipment - tools etc.
Equipment
Loctite 2701
Loctite 577
Locking screw
Bearing grease
Grease
Grease pump
Lifting tool (chain)
Shackle
Press tool, balancing device
Distance tool
Dismantle and mounting tool
Hydraulic cylinder
Hydraulic pump,
80 MPa
Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
Retaining ring, bore
Washer, M16x70 quality 8.8 steel
Hex socket head cap screw M16x70
VK-cover
Art. no.
See chapter:
•
See chapter:
•
See chapter:
•
3HAC037916-001
3HAA2166-12
Art. no.
-
12691907-001
-
3HAB3537-1
3HAC042534-001
-
3HAC15556-1
3HAC020997-001
3HAC020902-001
3HAC030662-001
3HAC028920-001
3HAC11731-1
3HAC13086-1
© Copyright 2011-2018 ABB. All rights reserved.
4.5.4.2 Replacing balancing device (design 2)
Note
Spare parts
For content see the figure in :
Spare parts • Location of parts in maintenance
sets, cradle and shaft on page 312
For content see the figure in:
Spare parts • Location of parts in maintenance
sets, cradle and shaft on page 312
Note
Used to lock the screw that hold the
shaft in the front ear.
M16x60 quality 12.9 Gleitmo.
For securing of the lower arm.
For unloading and restoring the balan-
cing device, (Method 1).
For unloading and restoring the balan-
cing device, (Method 2).
For dismantling and mounting of shaft
and bearings.
To be used with these tools:
• 3HAC028920-001
• 3HAC020902-001
To be used with the hydraulic cylinder
3HAC11731-1.
4 Repair
Continued
Continues on next page
313