Suzuki Baleno Manual page 1550

THROTTLE BODY AND INTAKE MANIFOLD
1. Air cleaner outlet hose
2. IAT sensor
REMOVAL
1) Disconnect negative cable at battery.
2) Drain coolant.
WARNING:
To help avoid danger of being burned, do not remover
drain plug and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
1. Drain plug
2. Radiator
3) Disconnect IAT sensor at coupler.
4) Remove air cleaner outlet hose.
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-11
1. Intake manifold
2. Intake manifold gasket
3. Throttle body
4. EGR pipe (if equipped)
5. EGR valve (if equipped)
6. IAC valve
7. Intake manifold rear stiffener
8. Intake manifold front stiffener