Suzuki Baleno Manual page 1582

1. Plunger 3. Body
2. Latch 4. Stopper
1. Timing chain tensioner
adjuster No.1
2. Timing chain tensioner
3. Stopper
1. Timing chain
guide No.1
2. Spacer
1. Match mark on idler sprocket
2. Dark blue plate
3. Match mark on crank timing sprocket
4. Yellow plate
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-43
8) With latch of tensioner adjuster No.1 returned and plunger
pushed back into body, insert stopper into latch and body.
After inserting it, check to make sure that plunger will not come
out.
9) Install timing chain tensioner adjuster No.1.
Tightening Torque
(a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
10) Pull out stopper from adjuster No.1.
11) Install timing chain guide No.1.
Tightening Torque
(a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
12) Check that dark blue and yellow plates of 1st timing chain are
in match with match marks on sprockets respectively.