Suzuki Baleno Manual page 1488

6A1-28 ENGINE MECHANICAL (G13/G16 TYPE ENGINE)
1. Outer rotor
2. Inner rotor
INSPECTION
D Check oil seal lip for fault or other damage. Replace as neces-
sary.
NOTE:
When installing oil seal, press-fit it till its end face is flush with
oil pump case end face.
1. Oil seal
2. Oil pump case
D Check outer and inner rotors, rotor plate, and oil pump case for
excessive wear or damage.
MEASUREMENT
D Radial clearance
Check radial clearance between outer rotor and case, using
thickness gauge.
If clearance exceeds its limit, replace outer rotor or case.
Limit on radial clearance between outer rotor and case:
0.310 mm (0.0122 in.)
D Side clearance
Using straight edge and thickness gauge, measure side clear-
ance.
Limit on side clearance: 0.15 mm (0.0059 in.)