Suzuki Baleno Manual page 1557

6A3-18 ENGINE MECHANICAL (J18 TYPE ENGINE)
1. Engine RH mounting bracket
1. Exhaust manifold 3. Exhaust pipe front No.1
2. Exhaust No.1 pipe
3. Exhaust pipe rear stiffener 4. Exhaust pipe front No.2
2) Install exhaust manifold.
1. Exhaust manifold
3) Install engine RH mounting bracket.
4) Install engine RH mounting.
5) Install air cleaner case with air cleaner outlet hose.
1. Engine RH mounting
6) Install pipe gasket and exhaust No.1 pipe.
7) Install exhaust pipe front No.1 and No.2 stiffeners.
8) Install engine under cover (Right side).
stiffener
stiffener
Tighten manifold bolt and nuts to specified torque.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)
Tighten bracket bolts to specified torque.
Tightening Torque
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
Tighten bracket bolts and nuts to specified torque.
Tightening Torque
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
Before installing pipe gasket, check it for deterioration or dam-
age, and replace as necessary.
Tighten exhaust pipe nuts and bolts to specified torque.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)