6A3-12 ENGINE MECHANICAL (J18 TYPE ENGINE)
1. Accelerator cable
2. Bracket
1. Throttle body
3. Intake manifold
2. Throttle body gasket
5) Disconnect accelerator cable from throttle body.
6) Remove accelerator cable from bracket.
7) Disconnect the following electric lead wires:
D IAC valve coupler
D TP sensor coupler
D MAF sensor coupler
D EGR valve coupler
D EVAP canister purge valve coupler
D MDP sensor coupler
8) Disconnect the following hoses:
D Brake booster hose from intake manifold
D PCV hose from PCV valve
D Fuel pressure regulator vacuum hose from intake manifold
D Coolant hoses from throttle body and cylinder head
D Breather hose from throttle body
D Vacuum hose from EVAP canister purge valve
9) Remove throttle body from intake manifold.
10) Remove intake manifold front stiffener and rear stiffener.
1. Intake manifold
front stiffener
2. Intake manifold
rear stiffener