6A1-58 ENGINE MECHANICAL (G13/G16 TYPE ENGINE)
6) Reverse removal procedure for installation, as previously out-
lined.
7) Adjust water pump drive belt tension, referring to Section 6B.
8) Adjust power steering pump belt tension or A/C compressor
belt tension, if equipped.
Refer to Section 0B.
9) Adjust accelerator cable play. Refer to Section 6E1.
10) Adjust A/T throttle pressure control cable play. Refer to Sec-
tion 7B (3 A/T).
11) Check to ensure that all removed parts are back in place. Rein-
stall any necessary parts which have not been reinstalled.
12) Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in Section 0B.
13) Refill cooling system referring to Section 6B.
14) Connect negative cable at battery.
15) Check ignition timing and adjust as necessary, referring to
Section 6F.
16) Verify that there is no fuel leakage, coolant leakage, oil leak-
age and exhaust gas leakage at each connection.