10) Crank engine with fully charged battery, and read the highest
pressure on compression gauge.
NOTE:
For measuring compression pressure, crank engine at
least 250 r/min. by using fully charged battery.
Standard
Limit
Max. difference between
any two cylinders
11) Carry out steps 8), 9) and 10) on each cylinder to obtain 4 read-
ings.
12) After checking, install spark plugs and ignition coils.
13) Install ignition coil couplers.
14) Install ignition coil cover.
15) Connect injector wire harness at coupler.
1. Ignition coil
2. Spark plug
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-7
Compression pressure
1400 kPa
(14.0 kg/cm
1200 kPa
(12.0 kg/cm
100 kPa
(1.0 kg/cm
2
, 199.0 psi)
2
, 170.0 psi)
2
, 14.2 psi)