Suzuki Baleno Manual page 1506

6A1-46 ENGINE MECHANICAL (G13/G16 TYPE ENGINE)
5) Install new valve stem seal to valve guide.
After applying engine oil to seal and spindle of special tool
(Valve guide installer handle), fit oil seal to spindle, and then
install seal to valve guide by pushing special tool by hand.
After installing, check to be sure that seal is properly fixed to
valve guide.
Special Tool
(A): 09917-98221
(B): 09916-58210
NOTE:
D Do not reuse seal once disassembled. Be sure to install
D When installing, never tap or hit special tool with a ham-
1. Valve stem seal
6) Install valve to valve guide.
Before installing valve to valve guide, apply engine oil to stem
seal, valve guide bore, and valve stem.
7) Install valve spring and spring retainer.
1. Large-pitch
2. Small-pitch
Each valve spring has top end (large-pitch end) and bottom end
3. Valve spring retainer
(small-pitch end). Be sure to position spring in place with its bot-
side
4. Valve spring seat
tom end (small-pitch end) facing the bottom (valve spring seat
side
side).
8) Using special tools (Valve lifter), compress valve spring and fit
two valve cotters into groove in valve stem.
Special Tool
(A): 09916-14510
(B): 09916-14910
(C): 09916-84511
1. Valve cotters
new seal.
mer or else. Install seal to guide only by pushing special
tool by hand. Tapping or hitting special tool may cause
damage to seal.