Suzuki Baleno Manual page 1554

9) Install accelerator cable to bracket.
10) Connect accelerator cable to throttle body.
Adjust accelerator cable play by referring to Section 6E2.
11) Install air cleaner outlet hose.
12) Connect IAT sensor wire at coupler.
1. Accelerator cable
13) Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been reinstalled.
14) Refill cooling system by referring to Section 6B.
15) Connect negative cable at battery.
16) Finally, start engine and check for engine coolant leaks.
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-15