Suzuki Baleno Manual page 1493

1. Rocker arm shaft bolt
2. Rocker arm shaft
1. Rocker arm spring 2. Rocker arm (EX)
1. Rocker arm (EX)
2. Rocker arm spring
ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-33
10) Remove rocker arm shaft bolts.
11) Push off rocker arm shaft end to ignition coils side and remove
O-ring from shaft.
12) Remove exhaust rocker arms and rocker arm spring by pulling
out rocker arm shaft to battery side after removing battery.
INSPECTION
Cam Wear
Using a micrometer, measured height of cam. If measured height
is below limit, replace camshaft.
Cam height
Intake cam
Exhaust cam
Standard
36.184 – 36.344 mm
(1.4246 – 1.4308 in.)
35.900 – 36.060 mm
(1.4134 – 1.4196 in.)
Limit
36.084 mm
(1.4207 in.)
35.800 mm
(1.4095 in.)