Suzuki Baleno Manual page 1594

1. Valve stem seal
2. Valve spring seat
DISASSEMBLY
1) When servicing cylinder head, remove intake manifold, injec-
tors, exhaust manifold and water outlet cap from cylinder head.
2) Using special tools, compress valve springs and then remove
valve cotters also by using special tool.
Special Tool
(A): 09916-14510
(B): 09916-14910
(C): 09919-28610
(D): 09916-84511
3) Release special tool, and remove spring retainers and valve
springs.
4) Remove valve from combustion chamber side.
1. Valve cotter
5) Remove valve stem seal from valve guide, and then valve
spring seat.
NOTE:
Do not reuse seal once disassembled. Be sure to use new
seal when assembling.
6) Using special tool (Valve guide remover), drive valve guide out
from combustion chamber side to valve spring side.
Special Tool
(A): 09916-44910
NOTE:
Do not reuse valve guide once disassembled. Be sure to
use new valve guide (Oversize) when assembling.
7) Place disassembled parts except valve stem seal and valve
guide in order so that they can be installed in their original posi-
tions.
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-55