1. Intake camshaft timing sprocket
2. Exhaust camshaft timing sprocket
1. Plunger
2. Timing chain tensioner
adjuster body
3. Stopper (Pin)
1. Timing chain tensioner adjuster No.2
2. Stopper
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-37
6) Install intake and exhaust camshaft timing sprocket bolts.
To install it, fit a spanner to hexagonal part at the center of cam-
shaft to hold it stationary.
Tightening Torque
(a): 80 N·m (8.0 kg-m, 58.0 Ib-ft)
7) With plunger pushed back into body, insert stopper into body.
After inserting it, check to make sure that plunger will not come
out.
8) Install timing chain tensioner adjuster No.2 and gasket.
Tightening Torque
(a): 11 N·m (1.1 kg-m, 8.0 Ib-ft)
(b): 45 N·m (4.5 kg-m, 33.0 Ib-ft)
9) Pull out stopper from timing chain tensioner adjuster No.2.