Suzuki Baleno Manual page 1555

6A3-16 ENGINE MECHANICAL (J18 TYPE ENGINE)
EXHAUST MANIFOLD
1. Exhaust manifold upper cover
2. Oxygen sensor
WARNING:
To avoid danger of being burned, do not service exhaust
system while it is still hot. Service should be performed
after system cools down.
REMOVAL
1) Disconnect negative cable at battery.
2) Disconnect heated oxygen sensor coupler and release it from
3) Remove exhaust manifold upper and lower covers.
4) Remove heated oxygen sensor from exhaust manifold.
3. Oxygen sensor coupler
4. Oxygen sensor bracket
5) Remove exhaust No.1 pipe nut.
6) Remove engine under cover (Right Side).
1. Exhaust No.1 nut
bracket.
1. Exhaust manifold
2. Engine hook
3. Exhaust manifold upper cover
4. Exhaust manifold under cover
5. Heated oxygen sensor-1
6. Exhaust manifold gasket
7. Exhaust No.1 pipe gasket
8. Exhaust No.1 pipe
9. Exhaust pipe rear stiffener
10. Exhaust pipe front No.1 stiffener
11. Exhaust pipe front No.2 stiffener
12. Heated oxygen sensor bracket
13. Engine RH mounting bracket