6A3-28 ENGINE MECHANICAL (J18 TYPE ENGINE)
TIMING CHAIN COVER
1. Engine under cover (RH)
REMOVAL
1) Disconnect negative cable at battery.
2) Drain engine oil.
3) Drain coolant.
4) Remove air cleaner case with air cleaner outlet hose.
5) Disconnect radiator inlet hose from radiator and then remove ra-
diator cooling fan.
6) Remove right side of engine under cover.
7) Remove generator belt.
Refer to Section 6B for removal.
1. Cylinder head cover
2. Cylinder head cover gasket
3. Cylinder head side seal
4. O-ring
5. Timing chain cover
6. Crankshaft pulley
7. Crankshaft pulley bolt
8. Oil seal