Action-Manifest Remove - Dell C9000 Series Reference Manual

Version
9.10(0.0)
9.9(0.0)
Usage Information To replace the default action-manifest with a customized one, copy the action-
manifest file to the system using the action-manifest put command and then use
the action-manifest install command. To revert to the default action-manifest
file, use the action-manifest install default command.
Related
Commands

action-manifest remove

Remove the action-manifest file for an activity.
Syntax
action-manifest remove <local-file-name>}
Parameters
local-file-name
Command Modes SUPPORTASSIST ACTIVITY
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.9(0.0)
Usage Information To revert to the default action-manifest file, use the action-manifest install
command. If necessary, you can then remove the custom action-manifest file.
Related
Commands
Description
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
• action-manifest get
• action-manifest show
• action-manifest remove
Enter the name of the local action-manifest file. Allowable
characters are: a to z, A to Z, 0 to 9, -, _, and space.
Description
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
• action-manifest get
• action-manifest install
activity.
• action-manifest show
— copy an action-manifest file for an activity to the system.
— view the list of action-manifest for a specific activity.
— remove the action-manifest file for an activity.
— copy an action-manifest file for an activity to the system.
— configure the action-manifest to use for a specific
— view the list of action-manifest for a specific activity.
SupportAssist 2143