Vlan Forward-Delay - Dell Z9500 Command Reference Manual

Version
7.6.1.0
7.5.1.0
6.2.1.1
Related

vlan forward-delay

Commands
Forwarding state.
vlan hello-time
vlan max-age
show spanning-tree pvst
vlan forward-delay
Set the amount of time the interface waits in the Listening state and the Learning state before
transitioning to the Forwarding state.
Z9500
Syntax
vlan vlan-range forward-delay seconds
To return to the default setting, use the no vlan forward-delay command.
Parameters
vlan vlan-range
forward-delay
seconds
Defaults 15 seconds
Command CONFIGURATION (conf-pvst)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Per-VLAN Spanning Tree Plus (PVST+)
Description
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— changes the time interval before the system transitions to the
— change the time interval between BPDUs.
— changes the time interval before PVST+ refreshes.
— displays the PVST+ configuration.
Enter the keyword vlan then the VLAN numbers. The range
is from 1 to 4094.
Enter the keywords forward-delay then the time interval,
in seconds, that the system waits before transitioning PVST+
to the forwarding state. The range is from 4 to 30 seconds.
The default is 15 seconds.
1469