Chapter 4
Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components
Figure 4-14
1
2
1 Captive screw
Verifying the Installation of a Switch Fabric Card
This section describes how to verify that a QQ123 or QQ123-140G switch fabric card has been properly
installed.
Figure 4-15
1 Status LED
OL-10971-10
Removing a Switch Fabric Card
Figure 4-15
shows the QQ123 switch fabric card front panel. The QQ123-140G card is similar.
Switch Fabric Card Front View (QQ123 Shown)
1
Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide
How to Install or Remove a Switch Fabric Card
2 Ejector lever
2
2 Alphanumeric LEDs
4-23