Finisher Stapler Assembly; Removing The Stapler Cover (Jost41722.Jpg); Removing The Finisher Stapler Assembly (Jost41737.Jpg) - Xerox WorkCentre 5222 Service Manual

REP 16.2.12 Finisher Stapler Assembly
Parts List on PL 23.8
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the Folder Knife Assembly.
2. Remove the Front Cover Assembly.
3. Remove the Stapler Cover. (Figure
a. Remove the Screw.
b. Remove the Stapler Cover.
Figure 1 Removing the Stapler Cover (jost41722.jpg)
Launch Version
WorkCentre 5225, 5230
WARNING
(REP 16.2.14)
(REP 16.2.2)
1)
4. Remove the Finisher Stapler Assembly.
a. Disconnect the Connectors (2).
b. Remove the Screws (3).
c. Remove the Finisher Stapler Assembly.
Stapler
Cover

Finisher Stapler Assembly

Screw
Figure 2 Removing the Finisher Stapler Assembly (jost41737.jpg)
Replacement
Reverse the removal procedure for replacement.
February, 2008
4-143
(Figure 2)
Connectors (2) Screws (3)
Repairs and Adjustments
REP 16.2.12