Rep 8.3 Paper Transport Assembly - Xerox WorkCentre 4150 Service Manual

REP 8.3 Paper Transport Assembly

Parts List on PL 8.20
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions,
1. Remove the registration roll, REP 8.2.
2. Prepare the rear of the paper transport assembly,
Figure 1 Preparation
Repairs and Adjustments
REP 8.3
WARNING
WARNING
CAUTION
GP
Figure 1.
2
Remove 1
screw, then the
1
bracket and
Disconnect the
bearing.
inline connector.
3. Prepare to remove the paper transport assembly,
10.
4. Remove the paper transport assembly,
3
Remove the Paper
Transport Assembly.
Figure 3 Remove the Paper Transport Assembly
January 2016
4-134 WorkCentre 4150/4250/4260WorkCentre WorkCentre 4150/4250/42604150/
Figure 2.
1
Remove 2 screws.
2
Remove 3 screws.
Figure 2 Preparation
Figure 3.
2
Guide the wire harness out
of the back panel.
1
Release 2
clips.