Ruijie Networks RG-S2600E Series Cli Reference Manual page 1108

S2600E CLI Reference Guide
Default
configuration
Command
mode
Usage
Guideline
Examples
Related
commands
7.2 Showing Related Commands
7.2.1 show smart manager detector
In the privileged mode, this command shows the monitor information
Chapter 7 SEM Configuration Commands
period-start
period-start-value
delay delay-value
correlate-period
correlate-period-value
maxrun
maxruntime-number
By default, the trigger is not configured.
SEM mode
N/A
The following example specifies the policy named Test_1
to run with 10 seconds delay after being triggered.
Ruijie(config)#smart manager applet Test_1
Ruijie(config-applet)#event tag none-event none
Ruijie(config-applet)#trigger delay 10
Ruijie(config-applet)#commit
Ruijie(config-applet)#exit
Command Description
smart manager Define the command line based SEM
applet policy.
(optional) start time of the period,
it is described in the Crom
method.
(optional) the policy
running after being triggered.
(optional) the time-out period of
the correlationship.
(optional) the maximum time to
run the policy. Over this time, the
policy will be forced to end. It is 20
seconds by default.
delays