Ruijie Networks RG-S2600E Series Cli Reference Manual page 1123

S2600E CLI Reference Guide
commands
1.1.2
Use this command to copy a file from the specified source directory to the
specified destination directory.
copy source-url destination-url
Parameter
description
Default
Command
mode
Usage
guidelines
Chapter 1 File System Configuration Commands
pwd
copy
Parameter
source-url
destination-url
N/A.
Privileged EXEC mode.
This command is used to copy the files among various
storage media in the local and to transmit the files between
the network servers:
The following table lists the URL prefix for the specified file
system:
Prefix
flash:
tftp:
xmodem:
slave:
usb0:
usb1:
sd0:
Show the present word directory.
Description
Source file URL, which can be local or
remote.
Destination file URL, which can be local
or remote.
Description
Flash storage media. This prefix can
be used in all devices. The default is
flash if the prefix is not used for the
URL. In general, the bootstrap main
program is stored in the flash.
TFTP network server
Use the xmodem protocol to transmit
the file to the network device.
Flash on the slave board from the
chassis device.
The first USB device.
The second USB device.
The first SD card.