B.5.4 Mxp_Mr_2.5G And Mxpp_Mr_2.5G Card Specifications - Cisco ONS 15454 DWDM Installation And Operation Manual

Appendix B Hardware Specifications
•
•
•
•

B.5.4 MXP_MR_2.5G and MXPP_MR_2.5G Card Specifications

The MXP_MR_2.5G and MXPP_MR_2.5G cards have the following specifications:
•
•
•
•
•
December 2006
Transmitter (client side)
Maximum transmitter output power: –1 dBm
–
Minimum transmitter output power: –6 dBm
–
Center wavelength: 1290 to 1330 nm
–
Nominal wavelength: 1310 nm
–
Transmitter: DFB laser
–
Receiver (client side)
Maximum receiver level: –1 dBm at BER 1 * 10 exp – 12
–
Minimum receiver level: –14 dBm at BER 1 * 10 exp – 12
–
Receiver: APD
–
Link loss budget: 8 dB minimum, at BER = 1 * 10 exp – 12
–
Receiver input wavelength range: 1290 to 1605 nm
–
Environmental
Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
–
Operating humidity: 5 to 95 percent, noncondensing
–
– Power consumption: 35.00 W, 0.73 A at –48 V, 119.5 BTU/hr
Dimensions
Height: 12.650 in. (321.3 mm)
–
Width: 0.716 in. (18.2 mm)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
Weight not including clam shell: 3.1 lb (1.3 kg)
–
Payload configuration
– FC1G—Fiber Channel 1.06 Gbps
– FC2G—Fiber Channel 2.125 Gbps
FICON1G—Fiber CON 1.06 Gbps (IBM signal)
–
FICON2G—Fiber CON 2.125 Gbps (IBM signal)
–
ONE_GE—One Gigabit Ethernet 1.125 Gbps
–
Mixed configurations up to maximum line rate (for example, if you have a port configured for
–
2G FC, you cannot use another port at the same time)
Client ports: 8x SFP
Performance monitoring (PM) for all interfaces
Buffer-to-buffer credit management for distance extension
Line (trunk side)
B.5.4 MXP_MR_2.5G and MXPP_MR_2.5G Card Specifications
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
B-41