Ip Rip Route-Tag - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ip rip route-tag

Configures the route tag value for RIP routes generated by the switch.
ip rip route-tag value
Syntax Definitions
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Only RIPv2 supports route tags.
Examples
-> ip rip route-tag 0
Release History
Release 6.6.1; command was introduced.
Related Commands
show ip rip
MIB Objects
alaRipRedistRouteTag
page 33-16
Route tag value. Valid range is 0–2147483647.
default
0
Displays the RIP status and general configuration parameters (e.g.,
forced hold-down timer).
OmniSwitch 6250 CLI Reference Guide
RIP Commands
November 2009