Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1332

output definitions
Slot/Port
Trust Mode
IP Src Filtering
Opt82 Violation
MAC Violation
Server Violation
Relay Violation
Binding Violation
Release History
Release 6.6.1; command was introduced.
Related Commands
show ip helper
show ip helper dhcp-snooping
vlan
MIB Objects
iphelperDhcpSnoopingPortTable
iphelperDhcpSnoopingPortIfIndex
iphelperDhcpSnoopingPortTrustMode
iphelperDhcpSnoopingPortIpSourceFiltering
iphelperDhcpSnoopingPortOption82Violation
iphelperDhcpSnoopingPortMacAddrViolation
iphelperDhcpSnoopingPortDhcpServerViolation
iphelperDhcpSnoopingPortRelayAgentViolation
iphelperDhcpSnoopingPortBindingViolation
page 32-56
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The DHCP Snooping trust mode for the port (Blocked, Client-Only, or
Trusted). Configured through the
mand.
Indicates whether or not IP source filtering is enabled for the port
(Enabled or Disabled). Configured through the
ing port ip-source-filtering
The number of DHCP packets dropped due to a DHCP Snooping
Option-82 violation.
The number of DHCP packets dropped due to a mismatch between the
packet source MAC address and the client hardware address contained
within the packet.
The number of DHCP server packets dropped because they originated
from outside the network or firewall.
The number of DHCP packets dropped because the packet included a
relay agent IP address that was not 0.0.0.0.
The number of DHCP packets dropped due to a mismatch between
packets received and binding table information.
Displays current DHCP Relay configuration information.
Displays a list of DHCP Snooping VLANs.
OmniSwitch 6250 CLI Reference Guide
DHCP Relay Commands
ip helper dhcp-snooping port
ip helper dhcp-snoop-
command.
com-
November 2009