Show Ip Udp Relay Statistics - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

DHCP Relay Commands

show ip udp relay statistics

Displays the current statistics for each UDP port relay service. These statistics include the name of the
service, the forwarding VLAN(s) configured for that service, and the number of packets the service has
sent and received.
show ip udp relay [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]
Syntax Definitions
BOOTP
NBDD
NBNSNBDD
DNS
TACACS
TFTP
NTP
port
Defaults
By default, the statistics for all UDP services is shown.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Enter a service name or port number with this command to display information about an individual
service.
•
When specifying a port number, do not specify a well-known port number. Instead, use the service
name for the well-known port (i.e., NBNS/NBDD, DNS, etc.).
Examples
-> show ip udp relay statistics
Service
---------------+--------+------------+----------
BOOTP
DNS
TACACS
OmniSwitch 6250 CLI Reference Guide
BOOTP/DHCP well-known ports 67/68.
NBDD well-known port 138.
NBNS/NBDD well-known ports 137/138.
DNS well-known port 53.
TACACS well-known port 65.
TFTP well-known port 69.
NTP well-known port 123.
A user-specified port that is not a well-known port.
Vlan Pkts Sent
0
2 10
4 15
3 0
November 2009
Pkts Recvd
0
10
15
0
page 32-61