Operation flow
EFI setting
HVM mode setting
HVM firmware
bank number setting
Start HVM.
Is there any
configuration data?
No.
No.
HVM initial setting
Set LPAR on the HVM screen
Save the configuration data.
Activate LPAR.
Set the EFI driver.
OS boot / OS installation
OS boot completion
Application installation
OS shutdown
HVM system shutdown
Yes.
Note: Saving the configuration allows
HVM to boot without setting LPAR
configuration from the next time.
No.
Is AutoACT enabled?
Yes.
Note: Setting and saving AutoACT allows
LPAR to activate automatically from the
*1
next HVM boot.
(*1): Install OS and application if
necessary.
*1
1041