Hitachi Compute Blade 2000 User Manual page 1106

For LPAR manager firmware version 58-7X/78-7X or later,
synchronizing LPAR manager system time with NTP server is
recommended.
If you reboot LPAR manager after operating it for a long time
without time synchronization with NTP server, or if a system
failure in LPAR manager or failover with N+M cold standby
unexpectedly occurs, a time lag occurs in the guest OS.
3 Configure settings for automatically saving time information
LPAR manager firmware version 59-41/79-41 or earlier
Go to the Options screen.

On Options screen, place the cursor on Save Time Config and press Enter to

display the subscreen. Select Enable and press Enter.
|| USB Auto Allocation+---------------------------------+---------------------+|
|| Save Changed Config| Save Time Configuration Setting |ng Character --------+|
|| LP TimerCounter Ba|
|| Save Time Config |
|+--------------------|
|| +---------------------------------+
|| |
|| +---------------------------------+---------------------+|
With LPAR manager firmware version 59-41/79-41 or later,
enabling "Save Time Config" is recommended. You can
change settings for "Save Time Config" while LPAR manager
is running.
If you reboot LPAR manager after operating it for a long time
with "Save Time Config" disabled, or if a system failure in
LPAR manager or failover with N+M cold standby
unexpectedly occurs, a time lag occurs in the guest OS.
If changing LPAR manager configuration or LPAR
configuration with "Save Time Config" enabled, make sure to
press the F9 key at the end of the setting change. Although
LPAR manager configuration is saved at time adjustment with
"Save Time Config" enabled, the timing cannot be specified.
When LPAR manager configuration is saved at time
adjustment, LPAR manager screen appears; system event
logs are collected; the alert is notified. Those operations can
be prevented by disabling "Save Time Config".
<LPAR manager screen>
| +------------------------------+
|+----------------------| Saving LP configuration ... |---------------------+ |
| +------------------------------+
<System event log>
|+- LP System Logs ------------------------------------------ All level
|| Level Date Time
|| Info. yyyy/mm/dd hh:mm:ss LP saved configuration.
|
Enable |---------------------+|
Disable |n -------------------+|
|
Event
1055
[Ctl]+ l ||
LPAR1 ||
LPAR1 To LPAR1||
| |
|
--+|
||
||