Hitachi Compute Blade 2000 User Manual page 629

If you enter M in the SNMP command menu and press Enter, you can set the SNMP
manager setting. When you enter the required information, a message to confirm the
SNMP manager setting appears. At the prompt, enter Y and press Enter, and the
SNMP agent setting is saved. To cancel the setting, enter N and press Enter, or just
press Enter.
(A,M,DA,DM,T,C,[Q]) : M
Select manager (0-3,[Q=Quit]) : 0
SNMP version : v1/v2c
(0=v1/v2c,1=v3,[Unchange]) : 1
Hostname : 0.0.0.0
([Unchange]) : 192.168.0.22
Port number : 162
(1-65535,[Unchange]) : 8162
User name : xxxxxx
([Unchange]) : UserName
Access type : noAuthnoPriv
(0=noAuthnoPriv,1=AuthnoPriv,2=AuthPriv,[Unchange]) : 2
Authentication type : MD5
(0=MD5,1=SHA,[Unchange]) : 1
Authentication password : *****
([Unchange]) :
Encryption type : DES
(0=DES,1=AES,[Unchange]) : 1
Encryption password : *****
([Unchange]) :
-- SNMP manager setting --
<Manager0>
SNMP version
Hostname
Port number
User name
Access type
Authentication type
Authentication password : *****
Encryption type
Encryption password
Confirm? (Y,[N]) : Y
- Writing setting was completed.
Hit enter key.
: v3
: 0.0.0.0
: 162
: UserName
: AuthPriv
: SHA
: AES
: *****
578