Restriction On Emulex 10 Gb Nic - Hitachi Compute Blade 2000 User Manual

Restriction on Emulex 10 Gb NIC

When the following Emulex 10 Gb NICs are used, combinations of Emulex 10 Gb NIC
firmware version and LPAR manager firmware version are restricted as shown in the table
below.
Emulex 10 Gb 2-port LAN adapter

Emulex 10 Gb 4-port LAN adapter

Emulex 10 Gb 2-port CNA adapter

Emulex 10 Gb 4-port CNA adapter

Emulex 10 Gb 2-port CNA board

Emulex 10 Gb
firmware version
(√): Supported
(-): Not supported
(-*): Not supported when Emulex 10 Gb NIC and 1 Gb switch module are connected.
Item
4.1.334.2801 or lower
4.2.433.604 or later
4.6.348.0 or later
1378
LPAR manager firmware version
59-3X/79-3X 59-4X/79-4X
or lower or later
√ (- *) -
√ (- *) √
- √