Hitachi Compute Blade 2000 User Manual page 944

PCI Express expander setting is described in the table below.
Item Description of item
# I/O module slot
number with a PCI
express expander
installed
The currently applied
Current
VS configuration
Config VS configuration that
can be applied when
the PCI express
expander is On.
To display the cable status, type D at the prompt, and press Enter. The display may
be different depending on your configuration.
- Control signal cable status --
-- I/O module0 --
# Presence Server status
- ------------- -------------
0 Connected On
1 Connected On
-- I/O module1 --
# Presence Server status
- ------------- -------------
0 Not connected -----------
1 Not connected -----------
-- I/O slot expansion unit connect cable status --
-- I/O module0 --
# Presence Link status Type
--- ------------- ----------- -------
0-0 Connected Up
0-1 Connected Up
1-0 Connected Up
1-1 Connected Up
-- I/O module1 --
# Presence Link status Type
--- ------------- ----------- -------
0-0 Not connected ---------
0-1 Not connected ---------
1-0 Not connected ---------
1-1 Not connected ---------
-- Control signal setting --
# Control signal
- --------------
0 Enable
1 Enable
-- Cable menu --
Q. Quit.
Value
0.1 -
PCI express expander: the power is
-------
Off or Not installed in the I/O module.
1:8 1:8 mode
1:4 1:4 mode
1:8 1:8 mode
1:4 1:4 mode
Metal
Metal
Metal
Metal
-----
-----
-----
-----
893
Description of value