Hitachi Compute Blade 2000 User Manual page 702

If you enter R at the LP menu and press Enter, the LP manager restore menu is
displayed.
(B,R,[Q]) : R (Enter)
-- LP restore menu --
B. Restore backup file to local backup data.
L. Restore local backup data.
Q. Quit.
(B,L,[Q]) :
Select a menu item from the following table to execute the function.
Menu
B. Restore backup file to
local backup.
L. Restore local backup
data.
Q. Quit
If you enter B at the LP restore menu and press Enter, the list of LPAR manager
configuration data files is displayed. You are prompted to select a file to restore. When
you enter the number to specify the file, you are prompted to select a partition. When
you enter the partition number and press Enter, a confirmation message appears. To
restore the configuration in the LPAR manager configuration data management area,
enter Y at the confirmation prompt and press Enter. To cancel the operation, enter N at
the confirmation prompt and press Enter, or simply press Enter.
(B,L,[Q]) : B (Enter)
-- Backup file list --
<File0>
hvm-bbbb.backup
Select backup file (0,[Q=Quit]) : 0
Select partition (0-7,[Q=Quit]) : 0
Confirm? (Y,[N]) : Y
- <Partition0> Restoring backup data was completed.
Hit enter key. (Enter)
Restores the LPAR manager configuration stored in the
user directory and saves it in the LPAR manager data
management area.
Sets the configuration data stored in the LPAR manager
data management area of the management module and
will be restored at the next LPAR manager boot.
Returns to the previous menu.
(Enter)
(Enter)
(Enter)
651
Description