Hitachi Compute Blade 2000 User Manual page 1133

 Attaching/detaching the USB device
1 Move the cursor to the USB device column on the PCI Device Assignment screen,
and press F5: Attach/Detach.
2 The USB Device Attach and Detach subscreen will be displayed. Follow the
screen message to select a number.
When the new LPAR number is entered, the USB device will be attached to the
selected LPAR: Attach. If the USB device is being attached to another LPAR at the
time, the USB device will be detached from the LPAR: Detach and attached to the
newly selected LPAR.
When '0: Detach only' is selected, the USB device will be simply detached from the
LPAR.
After the attachment operation, it might take about 30 seconds
• • •
Tip
until the USB device becomes available on the firmware or OS
in the LPAR.
+------------------------------------------------------------------------------+
|+- PCI Device Assignment ----------------------------------------------------+|
||
|| PCI Device#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|| Type: U N N N N N
|| Schd: E S S S S S
|| # Name Sta
|| 1 LPAR1 Act
|| 2 LPAR2 Act
|| 3 LPAR3 Dea
|| 4 LPAR4 Dea
|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
||
|+----------------------------------------------------------------------------+|
|+-Selected PCI Device Information--------------------------------------------+|
|| # Vendor Device Name
|| 0 Intel Corp. USB Controller
++----------------------------------------------------------------------------++
| F5:Attach/Detach F10:Update PCI Dev Schd F11:Left F12:Right
+------------------------------------------------------------------------------+
A - - - - -
R - - - - -
A +------------------------+
A | Device Attach / Detach |
| Now [ 2 LPAR2 ] |
| |
| 0 Detach only |
| 1 LPAR1 |
+------------------------+
[PageUp]:Page Up / [PageDown]:Page Down ||
Slot# Bus# Dev# Func# ||
U0
1082
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
0 1d 0 ||
Esc:Menu |