Hitachi Compute Blade 2000 User Manual page 597

Menu
4
5
6
If you enter the IP address of DNS server 2, the changed value is displayed. A warning
appears after the change is reflected saying that the connection to the management
module may be disconnected. A message to confirm the change is displayed. At the
prompt, enter Y and press Enter. The network setting is reflected on the management
module. When the IP address of the management module is changed, the session
connected by specifying the former IP address is disconnected. To cancel the network
setting in the management module, press N and press Enter, or simply press Enter to
confirm the new setting value.
(L,[Q]) : L (Enter)
IP address : 192.168. 0. 1
([Unchange]) : 192.168.0.10
Subnetmask : 255.255.255. 0
([Unchange]) : 255.255.254.0
Default gateway : 0. 0. 0. 0
([Unchange]) : (Enter)
DNS0 : 0. 0. 0. 0
([Unchange]) : (Enter)
DNS1 : 0. 0. 0. 0
([Unchange]) : (Enter)
DNS2 : 0. 0. 0. 0
([Unchange]) :
-- Management module LAN interface setting --
IP address Subnetmask
--------------- --------------- --------------- --------
192.168. 0. 10 255.255.254. 0
-- Management module DNS setting --
D IP address
- ---------------
0 0. 0. 0. 0
1 0. 0. 0. 0
2 0. 0. 0. 0
WARNING : Session may be disconnected when setting saved.
Confirm? (Y,[N]) : Y
- Writing setting was completed.
Hit enter key. (Enter)
IP address of the DNS server 0
IP address of the DNS server 1
IP address of the DNS server 2
(Enter)
(Enter)
Default gateway Ext port
0. 0. 0. 0
(Enter)
546
Description
MGMT-0