Hitachi Compute Blade 2000 User Manual page 1288

+--------------------------------------------------(19) Error Event Detected --+
|+- Logical Partition(LPAR) Date and Time -------------(1) LPAR RTC
|| # Name Sta Time Mode
|| 1 LPAR1 Act ----------- 2009/02/18 14:15:33 ------
|| 2 LPAR2 Dea ----------- 2009/02/18 14:15:33 ------
|| 3 LPAR3 Dea ----------- 2009/02/18 14:15:33 ------
|| 4 LPAR4 Dea ----------- 2009/02/18 14:15:33 ------
|| 5 (3) (4) (5)
|| 6
|| 7
|| 8
|| 9
|| 10
|+-(2)------------------------------------------------------------------------+|
|
|+- System Date and Time -----------------------------------------------------+|
|(9) Date and Time 009/02/18 14:15:33 Time Zone + 9:00
|(13)NTP(Disable)------------------------(10)----------------(11)-------------+|
|(16)NTP Server 1 None
|| NTP Server 2 None
|+----------------------------------------------------------------------------+|
|
+------------------------------------------------------------------------------+
|(18)F6:Change System Date and Time F7:Change System Time Zone
+------------------------------------------------------------------------------+
The following table describes each item on this screen.
# Title Official Name
(1) Select Display time
Display selection
(2) # LPAR number
(3) Name LPAR name
(4) Sta Status
(5) Time Mode SEL date and
time mode
Date and Time Time Zone Current RTC
(6) (7)
(17) [PageUp]:Page Up / [PageDown]:Page Down |
Adjust LPAR Time ||
Function
Specifies the time information to be displayed.
The initial value is set to display the current RTC
time (LPAR RTC).
LPAR RTC: Displays the current RTC time of the
LPAR.
LPAR SEL Time: Displays the logical SEL time of
the LPAR.
Last Activated: Displays the RTC time when the
LPAR is activated last.
Last Deactivated: Displays the RTC time when
the LPAR is deactivated last.
RTC Last Modified: Displays the RTC time of the
LPAR updated last by the guest.
Displays LPAR numbers.
Displays the LPAR name.
Displays the LPAR status.
Act (Activated): The LPAR is powered on.
Dea (Deactivated): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due to
an unrecoverable failure. Reboot LPAR manager
when this happens.
Sets the SEL date and time mode.
GMT: GMT (Greenwich Mean Time) mode
Local-Time: Local time mode
The SEL time mode can be set when LPAR SEL
Time has been displayed in the display time
selection.
1237
-+|
||
0 ||
0 ||
0 ||
0 ||
(8) ||
||
||
||
||
||
||
||
|
Esc:Menu |
Initial Value
(When LPAR is
added)
LPAR RTC
-
NO_NAME
Dea
Local-Time