Hitachi Compute Blade 2000 User Manual page 719

# Item
10 Configuration method
11 Current WWN type
12 WWN type
13 Automatic running state
14 Configuration status
15 Configuration result
16 Logical Partitioning
17 LP version
18 LP license
19 Sensors
20 ON
21 Shutdown
22 Forced power off
23 Smart Configure
24 Hard reset
25 Restart
26 NMI Generation
27 Cancellation
28 The release of suppress
powering on
29 Turn on
30 Turn off
31 Connection
32 Start
Description
initialization, "-------" is displayed.
Value: PXE or Inline
The current type of WWN for Smart Configure. Value:
Optional Physical WWN or Default Physical WWN
depending on settings and the type of a server blade.
When no server blade is installed, or the partition in
initialization, "-------" is displayed.
The type of WWN to be used for Smart Configure. Value:
Optional Physical WWN or Default Physical WWN
depending on settings and the type of a server blade.
Displays whether or not Smart Configure is set to be
automatically executed: valid or invalid.
The execution status of the Smart Configure function.
Set as: No Information, Not Configured, In Progress, or
Configured.
The execution result of the Smart Configure function.
Set as: Do not Care, OK, or NG
Indicates whether the logical partitioning is disabled or
enabled.
Set as: Disabled or Enabled
The version of LPAR manager installed on the physical
partition.
LPAR manager license of the physical partition.
The values reported by the sensors in the server blade
installed in the physical partition.
Turns on power to the physical partition.
Shuts down the physical partition.
Forcibly powers off the physical partition.
Perform Smart Configure on the physical partition.
Performs a hard reset of the physical partition.
Restarts the physical partition.
Issues a non-maskable interrupt (NMI) to the physical
partition.
Cancels the power on wait of the physical partition
When the physical partition is in power ON control
suppression status, cancels the suppression status for
the physical partition.
Turns on the Location ID LED for the physical partition.
Turns off the Location ID LED for the physical partition.
Connects to the server blade web console running on
the server blade. You can automatically log into the
server blade web console with Login and Administrator
privileges.
This button appears only with the management module
firmware version A0182 or later.
The remote console application starts downloading. You
can automatically log in to the server blade web console
with Login and Administrator privileges.
This button appears only with the management module
firmware version A0182 or later.
668