Hitachi Compute Blade 2000 User Manual page 1000

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

If you type DM in the SNM command menu and press Enter, you can delete SNMP

manager settings. Select a manager number to delete and the settings after deletion

and a confirmation message are displayed. At the prompt, type Y and press Enter, and

the SNMP manager setting is deleted. To cancel the deletion, type N and press Enter,

or just press Enter.

(A,M,DA,DM,T,C,[Q]) : DM

Select manager (0-3,[Q=Quit]) : 0

-- SNMP manager setting --

SNMP version

Community name

Confirm? (Y,[N]) : Y

- Writing setting was completed.

Hit enter key.

If you type T in the SNM command menu and press Enter, an SNMP trap for test is

sent. Type Y in the message to confirm the test transmission and press Enter. The

SNMP trap for test is transmitted. To cancel the test SNMP trap transmission, type N

and press Enter, or just press Enter.

(A,M,DA,DM,T,C,[Q]) : T

Confirm? (Y,[N]) : Y

- Sending SNMP trap was completed.

Hit enter key.

If you type C in the SNM command menu and press Enter, a copy of the MIB file is

mirrored into the user directory. Type Y in the message to confirm the copy execution

and press Enter to copy it. To cancel the copy process, type N and press Enter, or just

press Enter.

(A,M,DA,DM,T,C,[Q]) : C

Confirm? (Y,[N]) : Y

- Copying MIB file was completed.

Hit enter key.

Chapters

Table of Contents