Hitachi Compute Blade 2000 User Manual page 993

 SNM command
You can set Simple Network Management Protocol (SNMP) of the I/O module. Type
SNM at the prompt and press Enter.
5713RF0 NNNNN(0)IOEU> SNM
<< SNM - SNMP setting. >>
-- SNMP agent setting --
Agent : Enable
Contact name : contact
Location : location
Port number : 161
Trap level : All
SNMP version : v1/v2c/v3
Engine ID string : engineid
Engine ID : 8000007404656E67696E656964
-- SNMP manager setting --
<Manager0>
SNMP version
Hostname
Port number
Community name
<Manager1>
SNMP version
Hostname
Port number
User name
Access type
Authentication password :
Encryption type
Encryption password
<Manager2>
SNMP version
Hostname
Port number
Community name
<Manager3>
SNMP version
Hostname
Port number
User name
Access type
Authentication type
Authentication password : *****
Encryption type
Encryption password
-- MIB information --
Version : 00-00
-- SNMP setting menu --
A. Edit agent setting.
(Enter)
: v1/v2c
: 0.0.0.0
: 162
: ---
: v3
: 0.0.0.0
: 162
: User01
: noAuthnoPriv
---
: ---
: ---
: v1/v2c
: 0.0.0.0
: 162
: ---
: v3
: 192.168.0.22
: 162
: User03
: AuthPriv
: MD5
: DES
: *****
942