Hitachi Compute Blade 2000 User Manual page 1369

Numbers shown on the LPAR manager screen are as follows:
+------------------------------------------------------------------------------+
|+- Shared FC Assignment -----------------------------------------------------+|
|| Shared FC#:
|| Slot#:
|| Port#:
|| PortStatus:
|| # Name Sta
|| 1 LPAR1 Dea
|| 2
|| 3
Lower PCI slot numbers
|| 4
are shown later.
|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
||
|+----------------------------------------------------------------------------+|
|+-Selected Virtual FC Port WWN Information-----------------------------------+|
|| # LPAR# WWPN
|| 0 1 2378000087012110 2378000087012111
++----------------------------------------------------------------------------++
| F11:Left F12:Right
+------------------------------------------------------------------------------+
 How to use the shared FC function (I)
with connection to storage via FC switch with NPIV support
(1) Set shared FC on LPAR manager screen
The settings for sharing a FC adapter can be made on the PCI Device Assignment
screen and Shared FC Assignment screen. See
Assign shared FCs to LPARs
Set the scheduling mode of the FC card to the shared mode on the PCI Device

Assignment screen.
Set the following information on the Shared FC Assignment screen.

- Shared FC port to assign to the user LPAR
- WWN identifier (vfcID) to assign to the shared FC
(2) Set Shared FC for storage/FCSW
No special setting is required for the storage/FCSW (Fibre Channel Switch), but the
FCSW you are using needs to support the NPIV (N_Port ID Virtualization) function.
For the storage, set the virtual WWPN / WWNN (hereafter referred to as vfcWWPN
/ vfcWWNN).
The vfcWWPN / vfcWWNN is created by LPAR manager from the vfcID set in the
Shared FC Assignment screen. You can check the created vfcWWPN / vfcWWNN
on the LPAR manager Shared FC Assignment screen and the Allocated FC
Information screen.
(3) Set Adapter Performance Parameter
You can set each performance parameter of the FC adapter using the EFI driver on
the LPAR. See HITACHI Gigabit Fibre Channel Adapter User's Guide (BIOS/EFI
Edition).
0 1 2 3 4 5 6
7 7 6 6 E30 E30 E30 E30 E31 E31
0 1 0 1 0 1 2
A D D D D D D
1 * * * * * *
[PageUp]:Page Up / [PageDown]:Page Down ||
WWNN Bus# Dev# Func#
3 0
Assign PCI devices to LPARs
for details.
1318
7 8 9 ||
||
3 0 1 ||
D D D ||
||
* * * ||
||
||
||
||
||
||
||
||
||
vfcID# ||
0 1 ||
Esc:Menu |
and