Hitachi Compute Blade 2000 User Manual page 658

 ST Command
You can set Syslog Transfer of management modules. Type ST at the prompt and
press Enter.
<< ST - Syslog Transfer. >>
-- Syslog transfer setting --
Syslog transfer
Hostname of syslog server
Notification of audit event : Enable
-- Syslog transfer menu --
E. Edit syslog transfer setting.
Q. Quit.
(E,[Q]) :
Select a menu you require from the following list, and execute it.
Menu
E. Edit Syslog transfer setting.
Q. Quit
Items of Syslog transfer setting are described in the following table.
Description of
Item
Syslog Syslog transfer
transfer setting
Hostname IP address/host
of syslog name for
server destination
syslog server
Notification Notification
of audit setting for audit
event event
If you enter E in the ST command and press Enter, you can edit the Syslog transfer
setting. Current setting values are displayed in the following order, and the prompt is
ready. Just press Enter, or type a setting value and press Enter. You will go on to the
next item.
No.
1 Syslog transfer
2 Host name of syslog server
3 Notification of audit event
: Enable
: 192.168.0.100
Changes the Syslog transfer setting...
Quits the ST command..
Value
item
Enable
Disable
Character string
------
Enable
Disable
------
607
Description
Description of value
Executes Syslog transfer.
Not execute Syslog transfer.
Character string from one to 255;
available characters:
alphanumerics, period ".", and
hyphen "-".
Syslog transfer is disabled.
Executes Syslog transfer: An
Audit event occurs, and the
related log is sent by Syslog
transfer.
Not execute Syslog transfer.
Syslog transfer is disabled.
Item