Hitachi Compute Blade 2000 User Manual page 996

Item Description of item
type
Encryption Encryption password
password
MIB information is displayed.
Item Description of item
Version MIB file version
If you type A in the SNM command menu and press Enter, you can set the SNMP
agent setting.
The current setting is displayed in numerical order as shown in the following table. To
proceed to the next setting, press Enter, or enter a setting value and press Enter.
Menu
1
2
3
4
5
6
7
When you type a notification level with SNMP trap or a character string for ID, the
changed setting value is displayed. A confirmation message appears. Type Y and
press Enter, and the SNMP agent setting is applied. To cancel the setting, type N and
press Enter, or just press Enter.
(A,M,DA,DM.T,C,[Q]) : A
Agent : Enable
(0=Disable,1=Enable,[Unchange]) : 1
Contact name :
([Unchange]) : user01
Location :
([Unchange]) : A3F (Enter)
Port number : 161
(1-65535,[Unchange]) :
Trap level : All
(0=All,1=Alert,2=Information,3=Disable,[Unchange]) :
SNMP version : v1/v2c
(0=v1/v2c,1= v1/v2c/v3,[Unchange]) : 1
Engine ID string : zzzzzzzzzzzz
([Unchange]) : xxxxxxxxxxxxxx
DES
AES
-------
Character
string in
ASCII
Value
Character
string in
ASCII
SNMP agent : Enable or Disable
System contact name: administrator name
System location
Port number used by SNMP agents
SNMP trap notification level
SNMP version to be used
Type a character string for the engine ID (when SNMP
version v1/v2/v3 is selected).
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
945
Value Description of value
Type: DES
Type: AES
No encryption or no setting
String comprised of 8 to 64
characters in ASCII
With a setting, 5 asterisks
"*****" is always displayed.
Description of value
-
Description
(Enter)