Hitachi Compute Blade 2000 User Manual page 1528

Message content
Level Warning
Explanation Synchronizing RTC with an NTP server failed.
What to do Check the NTP setting.
Message content
Level Error
Explanation A request to LPAR manager Assist was discarded.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content RTC time was not successfully synchronized last time.
Level Warning
Explanation Synchronizing RTC with an NTP server failed due to some
temporary factor.
What to do When RTC time synchronization cannot succeed more than a day
after this log message is collected, save the configuration and then
synchronize RTC time.
If RTC time synchronization system log is not collected even though
you have saved the configuration, consult your reseller or call for
maintenance personnel.
Message content
Level Information
Explanation A request to LPAR manager Assist was retransmitted.
What to do None.
Message content Shared FC MCK Log was logged in LPAR at expansion card.
Level Information
Explanation Shared FC fault information was stored in the LPAR.
What to do None.
Message content
Level Information
Explanation Shared FC fault information was stored in the LPAR.
What to do None.
Message content SR-IOV device of LPAR was damaged and isolated.
Level Error
Explanation Forcibly isolated the PCI device due to error.
What to do Immediately shut down the guest OS to which the isolated PCI
device is assigned.
If the PCI device is not automatically recovered, execute Force
Recovery to release the isolation. Then, reboot the guest OS to use
the PCI device.
RTC time synchronization has failed.
Shadow Command is rejected.
Shadow Command was retried.
Shared FC MCK Log was logged in LPAR.
1477