Hitachi Compute Blade 2000 User Manual page 1532

ID Level
Description: LPAR migration process has been completed properly on the migration source. <X>
is the IP address on the migration source LP; <Y> is the IP address on the migration destination
LP.
Action: None.
Migration process completed on the destination LP.
0xFC77 Information
(SIP=<X>,DIP=<Y>)
Description: LPAR migration process has been completed properly on the migration destination.
<X> is the IP address on the migration source LP; <Y> is the IP address on the migration
destination LP.
Action: None.
0xFCA3 Warning Migration failed on the source LP. (SIP=<X>,DIP=<Y>,RC=<Z>)
Description: LPAR migration failed on the source LP. <X> is the IP address on the migration
source LP; <Y> is the IP address on the migration destination LP; <Z> is the error reason code.
Action: Take actions following HCSM messages shown during LPAR migration task in operation.
0xFCA4 Warning Migration failed on the destination LP. (SIP=<X>,DIP=<Y>,RC=<Z>)
Description: LPAR migration failed on the destination LP. <X> is the IP address on the migration
source LP; <Y> is the IP address on the migration destination LP; <Z> is the error reason code.
Action: Take actions following HCSM messages shown during LPAR migration task in operation.
0xFC78 Information LPAR <X>, Sent information update alert.
Description: LPAR <X> information is updated. <X> is the LPAR number.
Action: None.
0xFC79 Information LPAR <X>, Sent information update alert (add).
Description: LPAR <X> is added. <X> is the LPAR number.
Action: None.
0xFC7A Information LPAR <X>, Sent information update alert (remove).
Description: LPAR <X> is removed. <X> is the LPAR number.
Action: None.
LP configuration format has been changed. (Previous Ver.=<X>,New
0xFC03 Information
Ver.=<Y>)
Description: LP configuration format has been changed. <X> is the configuration format version
before change; <Y> is the configuration format version after change.
Action: None.
0xFC02 Information LP configuration was saved. (RC=<X>)
Description: LP configuration was saved. <X> is the trigger for saving.
Action: None.
0xFC01 Information LP started to shut down.
Description: LP started shutdown.
Action: None.
0xFC00 Information LP boot has completed.
Description: LP boot has completed.
Action: None.
Message
Description and Action
1481